Tenmat Linear Gap Seals
Intumescent linear firestop seals for vertical joints in walls or horizontal joints between floor slabs
PRODUCT DESCRIPTION
Tenmat’s FF108 Linear Gap Seals are fully intumescent linear firestop seals tested to EN 1366-4. The durable seals are installed under compression and can accept up to 50% movement. They are equally suited to both vertical and horizontal joints. The seals offer up to 4 hour (EI240) fire rating for joints in fire rated walls and floors.
DIMENSIONS
Supplied in lengths of 1000mm.
A variety of sizes of the Tenmat Linear Gap Seals are held in stock by AIM and are available in quantities starting from a single unit (transport charges may apply on small orders).
PRODUCT INFORMATION
- Up to EI240 Fire Rating
- Compressible up to 50%
- Available to suit gap sizes up to 100mm
- Accepts joint movement
- No additional sealants required
TECHNICAL INFORMATION
Please refer to Tenmat Technical datasheet for Linear Gap Seals. Alternatively call the Tenmat technical department on +44 161 872 2181.
ORDERING
To order this product the following information will be required:
- Approximate quantity
- Delivery location
A variety of sizes of the Tenmat Linear Gap Seals are held in stock by AIM and are available in quantities starting from a single unit (transport charges may apply on small orders).
Please contact our sales office for further details.
There is no minimum order quantity or value although small orders may attract transport surcharges.
TECHNICAL SUPPORT
Technical Support is available from our experienced sales team on 01293 582 400 or [email protected]
Our Partners & Affiliates
