AIM Liner Units

Square or taper edge plasterboard - bonded to AIM insulation slab.

Choice of Insulation -

LAMELLA (LAM)
Lamellas are made from high density rock wool slab, which is cut into blocks and rotated through 90 degrees before being bonded to the plasterboard.
Lamella rock wool is incombustible and is especially suitable for acoustic applications.

EXTRUDED POLYSTYRENE (XPS)
Versatile expanded polystyrene for optimum value and light weight.

EXPANDED POLYSTYRENE (EPS)
Polyurethane foam has very low thermal conductivity and is particularly suitable for applications where space is at a premium.


Introduction

AIM Liner Units are manufactured from plasterboard bonded to insulation. The Liner Units are available with an optional aluminium foil vapour barrier between plasterboard and insulation.
AIM Liner Units are used to provide an insulated internal lining for walls and ceilings. The Liner Units will provide considerably enhanced insulation, improved

sound reduction and a smooth plasterboard internal finish. The gypsum plaster facing material should not be used in continuously damp conditions or externally on a building.

Standards

The plasterboard satisfies the requirements of BS 1230:1985 'Gypsum Plasterboard'. The insulation satisfies the requirements of BS5422:1977

'Specification for the use of thermal insulating materials'. The surface of the plasterboard complies with the performance requirements of Class O of the Building Regulations. The plasterboard is incombustible to BS 476 part 4, rated Class 1 Surface Spread of Flame to BS 476 part 7, and achieves index of performance (l) not exceeding 12 and sub-index(i1) not exceeding 6 (both sides) to BS 476 part 6.

Click here for full data sheet (pdf format)